How do I install a new video card into a PC?

1. Verify System Requirements:

   • Ensure that your system meets the graphics card’s requirements. Check the retail box or the listing on our website for system specifications.

2. Check the Power Supply Unit (PSU):

   • The PSU is crucial when installing or upgrading a graphics card. An insufficient power supply can cause system malfunctions. Verify that your PSU can handle the new graphics card.

How do I install the new graphics card?

1. Remove Previous GPU Drivers:

   • Follow the recommended driver removal method for your current GPU. For example, use Intel’s recommended method for removing Intel-based GPU drivers, AMD Cleanup Utility for AMD products, or  Display Driver Uninstaller by Wagnardsoft. 

2. Turn Off the PC:

   • Power down your PC.
   • Switch the PSU to the ‘off’ position.
   • Unplug the power cable from the PSU.

3. Open the PC Case:

   • Remove the side panel of your PC case.

4. Remove Existing Graphics Card:

   • If you have a discrete graphics card installed, remove it.
   • If not, proceed to install the new graphics card in the appropriate expansion slot (refer to your system or motherboard manual for guidance).

5. Install the New Graphics Card:

   • Insert the new graphics card into the correct expansion slot.
   • Secure the bracket properly to prevent the card from moving.

6. Connect Power Cables:

   • If the graphics card requires additional power, connect the necessary power cables from the PSU.

7. Close the PC Case:

   • Replace the side panel of the PC case.

8. Reconnect Power:

   • Plug in the power cord.
   • Switch the PSU to the ‘on’ position.

9. Power On the PC:

   • Turn on your PC.

10. Install Graphics Card Drivers:

• After logging into your operating system, install the drivers provided with the graphics card or download the latest drivers from AMD at www.amd.com.