SSD Installation (7mm or 9mm):
- Turn off the PC, switch the PSU to the ‘off’ position and unplug the power cable from the PC.
- Remove the side panel from the PC case.
- Select a drive bay location for the SSD. Note: Ensure you have enough reach with the SATA power cable from the PSU and enough reach for the SATA data cable to the mother board.
- Connect a SATA data cable to the SSD and connect the other end to your motherboard’s SATA slot (reference the motherboard manual for the appropriate SATA slot to maximize performance).
- Connect the SATA power cable from the PSU to the SSD.
- Secure the SSD into the drive bay.
- Close side panel of the PC case.
- Plug in the power cord and switch the PSU to the ‘on’ position.
- Power on your PC.